9 - 36– +ELECSIGNAL SYSTEMCHECKING THE SIGNAL SYSTEM1.If the brake light fails to come on:CONTINUITY1.Bulb and bulb socket Check the bulb and bulb socket forcontinuity.NO CONTINUITYReplace the bulb and/or bulb socket.CONTINUITY2.Brake light switchesRefer to “CHECKING THE SWITCHES”.NO CONTINUITYReplace the brake light switch.3.Voltage Connect the pocket tester (DC 20 V) to thebulb socket connector.Tester (+) lead → Yellow terminal 1Tester (–) lead → Black terminal 2MEETSSPECIFICATION Turn the main switch to “ON”. Pull in the brake lever or push down on thebrake pedal. Check the voltage (12 V) of the “Yellow”lead on the bulb socket connector.This circuit is not faulty.OUT OF SPECIFICATIONThe wiring circuit from the main switch to thebulb socket connector is faulty, repair it.
