DRIVING AND OPERATING 215Warning (Continued). Visibility is low, such as infog, rain, or snow conditions.ACC performance is limitedunder these conditions.. On slippery roads where fastchanges in tire traction cancause excessive wheel slip.J : Press to turn the system on oroff. A white cruise control indicatorcomes on.+RES : Press the control up briefly toresume the previous set speed or toincrease vehicle speed if ACC isalready activated. To increase speedby 1 km/h (1 mph), press +RES up tothe first detent. To increase speed tothe next 5 km/h (5 mph) mark on thespeedometer, press +RES up to thesecond detent.SET– : Press the control down brieflyto set the speed and activate ACC orto decrease vehicle speed if ACC isalready activated. To decrease speedby 1 km/h (1 mph), press SET− downto the first detent. To decrease speedto the next 5 km/h (5 mph) mark onthe speedometer, press SET− down tothe second detent.* : Press to disengage ACC withouterasing the set speed from memory.[ : Press to select a following gaptime (or distance) setting for ACC ofFar, Medium, or Near.Switching Between ACC andRegular Cruise ControlTo switch between ACC and regularcruise control, press and hold *.A Driver Information Display (DIC)message displays.ACC Indicator Regular CruiseControl IndicatorWhen ACC is engaged, a green oindicator will be lit on the instrumentcluster and the following gap will bedisplayed. When the regular cruisecontrol is engaged, a green Jindicator will be lit on the instrumentcluster; the following gap will notdisplay.When the vehicle is turned on, thecruise control mode will be set to thelast mode used before the vehicle wasturned off.
