VEHICLE CARE 31710. Inflate the tire to therecommended inflation pressureusing the pressure gauge (3). Therecommended inflation pressurecan be found on the Tire andLoading Information label. SeeTire Pressure 0 297.The pressure gauge (3) may readhigher than the actual tirepressure while the compressor ison. Turn the compressor off toget an accurate reading. Thecompressor may be turned on/offuntil the correct pressure isreached.If you inflate the tire higher thanthe recommended pressure youcan adjust the excess pressure bypressing the pressure deflationbutton (4) until the properpressure reading is reached. Thisoption is only functional whenusing the air only hose (7).11. Press the on/off button (2) toturn the tire sealant andcompressor kit off.Be careful while handling the tiresealant and compressor kit as itcould be warm after usage.12. Unplug the power plug (8) fromthe accessory power outlet in thevehicle.13. Disconnect the air only hose (7)from the tire valve stem, byturning it counterclockwise, andreplace the tire valve stem cap.14. Replace the air only hose (7) andthe power plug (8) and cord backin its original location.15. Place the equipment in theoriginal storage location in thevehicle.The tire sealant and compressor kithas an accessory adapter located in acompartment on the bottom of itshousing that may be used to inflateair mattresses, balls, etc.Removal and Installation of theSealant CanisterTo remove the sealant canister:1. Unwrap the sealant hose.2. Press the canister releasebutton (9).3. Pull up and remove the canister.4. Replace with a new canisterwhich is available from yourdealer.5. Push the new canister into place.Storing the Tire Sealantand Compressor KitTo access the tire sealant andcompressor kit:1. Open the trunk. See Trunk 0 42.2. Lift the cover.
