316 VEHICLE CARE1. Selector Switch (Sealant/Airor Air Only)2. On/Off Button3. Pressure Gauge4. Pressure Deflation Button5. Tire Sealant Canister6. Sealant/Air Hose (Clear)7. Air Only Hose (Black)8. Power Plug9. Canister Release Button(Under Sealant/Air Hose)If a tire goes flat, avoid further tireand wheel damage by driving slowlyto a level place. Turn on the hazardwarning flashers. See Hazard WarningFlashers 0 154.See If a Tire Goes Flat 0 310 for otherimportant safety warnings.1. Remove the tire sealant andcompressor kit from its storagelocation. See Storing the TireSealant and Compressor Kit 0 317.2. Unwrap the air only hose (7) andthe power plug (8).3. Place the kit on the ground.Make sure the tire valve stem ispositioned close to the ground sothe hose will reach it.4. Remove the tire valve stem capfrom the flat tire by turning itcounterclockwise.5. Attach the air only hose (7) ontothe tire valve stem by turning itclockwise until it is tight.6. Plug the power plug (8) into theaccessory power outlet in thevehicle. Unplug all items fromother accessory power outlets.See Power Outlets 0 111.If the vehicle has an accessorypower outlet, do not use thecigarette lighter.If the vehicle only has a cigarettelighter, use the cigarette lighter.Do not pinch the power plugcord in the door or window.7. Start the vehicle. The vehiclemust be running while using theair compressor.8. Press and turn the selectorswitch (1) clockwise to the AirOnly position.9. Press the on/off button (2) toturn the compressor on.The compressor will inflate thetire with air only.
