UMN:CLI User ManualV5812G1106.3.14 Switch StatusTo display the temperature of switch, power status, and fan status, use the followingcommand.Command Mode Descriptionshow status fan EnableGlobalBridgeShows the fan status of the switch.show status temp Shows the current temperature of the switch.show status powerEnableGlobalShows the current power status.show power statusshow environment Shows fan stauts and temperature of switch.6.3.15 Tech Support InformationFor various reason, a system error may occur. Once the system error occurs, systemengineers try to examine the internal system information such as a system configuration,log data, memory dump, and so on to solve the problem.To reduce the effort to acquire the detail informtation of the system for a technicalsuppport, the V5812G provides the function that generates all the system informationreflecting the current state. Using this function, you can verify all the details on a consolescreen or even in the remote place via FTP/TFTP.To generate the tech-support information, use the following command.Command Mode Descriptiontech-support {all | crash-info}consoleEnableGenerates the tech-support information on a consolescreen.tech-support {all | crash-info}remote A.B.C.D {ftp | tftp}Generates the tech-support information in the remoteplace via FTP or TFTP. The name of the generatedinformation file is a.info. (This is not changeable.)In case of generating the tech-support information on a console screen, the contents willbe displayed without the screen pause regardless of your terminal configuration.6.3.16 System Boot InformationTo display the information of the last system boot, use the following command.Command Mode Descriptionshow boot-infoEnableGlobalBridgeShows the information of the last system boot.!
