User Manual UMN:CLIV5812G52311.6.2.2 VoIP Application ServiceThe configuration of VoIP application service defines the attributes of calling featuresused in conjunction with a VoIP line service, such as CID, call waiting, call transfer, callpresentation, direct connect, and etc.To configure the CID features, use the following command.Command Mode Descriptioncaller-id {call-number | call-name | cid-blocking | cid-number | cid-name | acr} VoIP-SIPEnables each feature for caller ID. (default: disabled)call-number: calling numbercall-name: calling namecid-blocking: CID blocking (both number and name)cid-number: permanent presentation status for numbercid-name: permanent presentation status for nameacr: anonymous CID blocking. It may not be possible tosupport this feature in the ONT.no caller-id Disables all the features for caller ID.To configure the call waiting features, use the following command.Command Mode Descriptioncall-waiting {call-wait | cid-announce} VoIP-SIPEnables each feature for call waiting. (default:disabled)call-wait: call waitingcid-announce: caller ID announcementno call-waiting Disables the call waiting feature.To configure the call processing (transfer) features, use the following command.Command Mode Descriptioncall-progress-transfer {3way |call-transfer | call-hold | call-park | not-disturb | flash-emerg-call | emerg-originating-hold |6way}VoIP-SIPEnables each feature for call processing. (default:disabled)3way: 3way callcall-transfer: call transfercall-hold: call holdcall-park: call parknot-disturb: do not disturbflash-emerg-call: flash on emergency service call (flashis to be processed during an emergency service call)emerg-originating-hold: emergency service originatinghold (determines whether call clearing is to beperformed on on-hook during an emergency servicecall)6way: 6way callno call-progress-transfer Disables all the features for call processing.
