User Manual UMN:CLIV5812G1397.4.3.1 Event CommunityWhen RMON event occurs, you need to input community to transmit SNMP trap messageto host. Community means a password to give message transmission right.To configure community for trap message transmission, use the following command.Command Mode Descriptioncommunity NAME RMONConfigures password for trap message transmissionright.NAME: community name7.4.3.2 Event DescriptionIt is possible to describe event briefly when event occurs. However, the description willnot be automatically made. Thus administrator should make the description.To specify a description about the current RMON event, use the following command.Command Mode Descriptiondescription DESCRIPTION RMON Specifies the description of the current RMON event.7.4.3.3 Subject of RMON EventYou need to configure event and identify subject using various data from event. To identifysubject of RMON event, use the following command.Command Mode Descriptionowner NAME RMONIdentifies subject of event. You can use maximum 126characters and this subject should be same with thesubject of RMON event.7.4.3.4 Event TypeWhen RMON event is happened, you need to configure event type to arrange where tosend event.To configure event type, use the following command.Command Mode Descriptiontype logRMONConfigures event type as log type. Event of log type issent to the place where the log file is made.type trap Configures event type as trap type. Event of trap typeis sent to SNMP administrator and PC.type log-and-trap Configures event type as both log type and trap type.type none Configures none event type.
