UMN:CLI User ManualV5812G1247.1.9.6 STP Guard Alarm SeverityTo set severity of an alarm for STP guard, use the following command.Command Mode Descriptionsnmp alarm-severity stp-bpdu-guard {critical | major | minor |warning | intermediate} GlobalSets severity of an alarm for BPDU guard disabled.snmp alarm-severity stp-root-guard {critical | major | minor |warning | intermediate}Sets severity of an alarm for root guard disabled.To delete configured severity of alarm for STP guard, use the following command.Command Mode Descriptionno snmp alarm-severity stp-bpdu-guard Global Deletes configured severity of an alarm for STP guard.no snmp alarm-severity stp-root-guard7.1.9.7 Displaying SNMP AlarmTo display a collected alarm, use the following command.Command Mode Descriptionshow snmp alarm-severity EnableGlobalBridgeShows a configured alarm severity.show snmp alarm-history Shows a collected alarm history.show snmp alarm-report Shows a collected alarm report.To deletes a collected alarm in the system, use the following command.Command Mode Descriptionsnmp clear alarm-history Global Deletes a collected alarm history in the system.snmp clear alarm-report Deletes a collected alarm report in the system.7.1.10 Displaying SNMP ConfigurationTo display all configurations of SNMP, use the following command.Command Mode Descriptionshow snmpEnableGlobalBridgeShows all configurations of SNMP.
