UMN:CLI User ManualV5812G3008.6.8.2 Static IP Source BindingThe IP source binding table has bindings that are learned by DHCP snooping or manuallyspecified with the ip dhcp verify source binding command. The switch uses the IPsource binding table only when IP source guard is enabled.To specify a static IP source binding entry, use the following command.Command Mode Descriptionip dhcp verify source binding<1-4094> PORT A.B.C.D MAC-ADDR GlobalSpecifies a static IP source binding entry.1-4094: VLAN IDPORT: port numberA.B.C.D: IP addressMAC-ADDR: MAC addressno ip dhcp verify source binding{A.B.C.D | all} Deletes a specified static IP source binding.8.6.8.3 Displaying IP Source Guard ConfigurationTo display IP source binding table, use the following command.Command Mode Descriptionshow ip dhcp verify sourcebindingEnableGlobal Shows IP source binding entries.8.6.9 DHCP ClientAn interface of the V5812G can be configured as a DHCP client, which can obtain an IPaddress from a DHCP server. The configurable DHCP client functionality allows a DHCPclient to use a user-specified client ID, class ID or suggested lease time when requestingan IP address from a DHCP server. Once configured as a DHCP client, the V5812Gcannot be configured as a DHCP server or relay agent.8.6.9.1 Enabling DHCP ClientTo configure an interface as a DHCP client, use the following command.Command Mode Descriptionip address dhcp Interface Enables a DHCP client on an interface.no ip address dhcp Disables a DHCP client.8.6.9.2 DHCP Client IDTo specify a client ID, use the following command.Command Mode Descriptionip dhcp client client-id hex HEXSTRINGInterfaceSpecifies a client ID.ip dhcp client client-id text STRINGno ip dhcp client client-id Deletes a specified client ID.
