User Manual UMN:CLIV5812G267promiscuous and protected ports within a PVLAN.• Protected: An protected port has complete Layer 2 separation from the other portswithin the same PVLAN, but it floods the traffic to the promiscuous ports. PVLANsblock all traffic to protected ports except traffic from promiscuous ports. Traffic fromprotected port is forwarded only promiscuous ports.To configure all ports as the protected ports while ERP is enabled in the system, use thefollowing command.Command Mode Descriptionport protected erp BridgeSpecifies all ports as protected ports while ERP isrunning in the systemno port protected erp Deletes all protected ports in ERP protected modeTo specify promiscuous ports, use the following command.Command Mode Descriptionport protected erp promiscuousPORTS BridgeSpecifies the promiscuous port while ERP is running inthe systemno port protected erppromiscuous PORTS Deletes the configured promiscuous port.If a port is already configured by Port Isolation, this port should be disabled by no portproteced command to be set ERP promiscuous port.Except for the specified promiscuous ports, the rest of ports are automatically set as theprotected ports.To display the information of port protected mode, use the following command.Command Mode Descriptionshow port protectedEnableGlobalBridgeShows the status of port protected mode.8.4.15 Displaying ERP ConfigurationTo display a configuration of ERP, use the following command.Command Mode Descriptionshow erp [all | <1-4094>]EnableGlobalBridgeShows the information of ERP1-4094: domain ID and control VLAN IDii
