UMN:CLI User ManualV5812G53611.8.3 Jitter Buffer Desired DepthTo specify the desired nominal fill depth of the playout buffer in the PSN to TDM direction,use the following command.Command Mode Descriptionjitter-buffer-desired-depthVALUE PW-Maintenance-ProfileSpecifies the desired nominal fill depth of the playoutbuffer in the PSN to TDM direction.VALUE: expressed as a multiple of the 125 μs framerateno jitter-buffer-desired-depth Deletes the configured nominal fill depth of the playoutbuffer.11.8.4 Fill PolicyTo specify the payload bit pattern to be applied toward the TDM service, if no payloadpacket is available to play out, use the following command.Command Mode Descriptionfill-policy {vendor-specific |play-out-ais | play-out-all-1s |play-out-all-0s | repeat-prev-data| play-out-ds1-idle}PW-Maintenance-ProfileDefines the payload bit pattern to be applied toward theTDM service if no payload packet is available to playout.vendor-specific: ONT default, vendor-specific(recommended: AIS for unstructured service, all 1s forstructured service)play-out-ais: Play out AIS according to the servicedefinition (for example, DS3 AIS)play-out-all-1s: Play out all 1splay-out-all-0s: Play out all 0srepeat-prev-data: Repeat the previous dataplay-out-ds1-idle: Play out DS1 idle (Appendix C of "b-ATIS T1.403")no fill-policy Deletes the configured payload bit pattern.
