User Manual UMN:CLIV5812G543To clear the collected traffic statistics, use the following command.Command Mode Descriptionclear onu statisticsGPON Clears collected traffic statistics of an ONU.clear onu statistics OLT-ID[ONU-ID]clear onu statistics [ONU-ID] GPON-OLT Clears collected traffic statistics of an ONU.11.9.6 Sample ConfigurationFor the sample configuration, see ―Configuration Example 2‖ in 11.13 SampleConfiguration.11.10 Multicast ProfileThe multicast profile is used for ONU (ONT) to handle the multicast traffic using a IGMP-related commands. Multicast profile managed entity organizes data associated withmulticast management at subscriber ports of 802.1 bridges, including 802.1p mapperswhen the provisioning model is mapper-based rather than bridge-based. Instances of thismanaged entity are created and deleted by the OLT. It is the responsibility of the OLT tomanage the members of a multicast group and control the multicast connection in ONTs11.10.1 Creating Multicast ProfileTo create a multicast profile, use the following command.Command Mode Descriptionmulticast-profile NAME create GPON Creates a multicast profile.NAME: multicast profile nameAfter opening Multicast Profile Configuration mode, the prompt changes fromSWITCH(gpon)# to SWITCH(config-mcast-profile[NAME])#.To delete a created multicast profile, use the following command.Command Mode Descriptionno multicast-profile NAME GPON Deletes a created multicast profile.NAME: multicast profile nameTo modify an existing multicast profile, use the following command.Command Mode Descriptionmulticast-profile NAME modify GPON Modifies the existing multicast profile.NAME: multicast profile name
