User Manual UMN:CLIV5812G795 Port ConfigurationThe V5812G features highly flexible hardware configurations with multiple GPON andGigabit Ethernet components. In this chapter, you can find the instructions for the basicport configuration such as auto-negotiation, flow control, transmit rate, etc. Please readthe following instructions carefully before you configure a port in the V5812G.This chapter contains the following sections.• Port Basic• Ethernet Port Configuration• Port Mirroring5.1 Port Basic5.1.1 Selecting Port TypeV5812G provides the combo uplink ports either 1000Base-X optical interfaces or10/100/1000Base-T electrical interfaces, you should select port type. (RJ45 and SFP).To select port type, use the following command.Command Mode Descriptionport medium PORT {sfp | rj45} Bridge Selects port type(Default: RJ45)To view the configuration of switch port type, use the following command.Command Mode Descriptionshow port mediumEnableGlobalBridgeShows port type5.2 Ethernet Port Configuration5.2.1 Enabling Ethernet PortTo enable/disable the Ethernet port, use the following command.Command Mode Descriptionport {enable | disable} PORTS BridgeEnables/disables a port, enter a port number.(default: enable)PORTS: port number
