User Manual UMN:CLIV5812G507To configure VoIP service management mode, use the following command.Command Mode Descriptionmanage-method {omci | ip-path}Traffic-VoIPSets VoIP service management mode.omci: ONT Management and Control Interfaceip-path: IP-path managedno manage-method Deletes the configured VoIP service managementmode.11.5.6.2 OMCI Managed VoIPIf you configure the VoIP service management mode as OMCI managed by using voip-profile omci command, you need to connect VoIP profile with which OLT can handle theconfigurations for VoIP clients. To connect VoIP profile to the current VoIP service, usethe following command.Command Mode Descriptionvoip-profile NAME Traffic-VoIPConnects VoIP profile to the current VoIP service.NAME: VoIP profile nameno voip-profile Disconnects the specified VoIP profile.For the details of how to create and configure the VoIP profile, see 11.6 VoIP Profile.11.5.6.3 IP-path Managed VoIPIf you configure the VoIP service management mode as IP-path managed by using voip-profile ip-path command, you need to set IP-path configuration in VoIP IP-pathConfiguration mode.When you use the voip-profile ip-path command, you enter automatically VoIP IP-pathConfiguration mode.Whenever an ONU is deployed with the IP-path managed VoIP service, the OLT shouldassign the URL of a VoIP configuration file to communicate with the ONU VoIP client. TheV5812G provides an authentication method for ONUs to have access to the VoIPconfiguration server.To configure IP-path managed VoIP mode, use the following command.Command Mode Descriptionip-path uri URITrafficVoIP-IP-pathConfigures a VoIP configuration server.URI: IP-path URIip-path auth NAME [PASSWD]Sets the user ID and password for IP-path managedmodel to have access to VoIP configuration server.NAME: user name used for authenticationPASSWD: password used for authenticationno ip-path { uri | auth } Deletes the configured VoIP configuration server orauthentication information.ii
