UMN:CLI User ManualV5812G36Tab. 3.4 shows main commands of Bridge Configuration mode.Command Descriptionlacp Configures LACP.mac Configures a MAC table.mirror Configures a port mirroring.oam efm Configures EFM OAM.port Configures Ethernet port.trunk Configures a trunk port.vlan Configures VLAN.Tab. 3.4 Main Command of Bridge Configuration Mode3.1.5 DHCP Pool Configuration ModeIn DHCP Pool Configuration mode, you can configure general functions of DHCP pereach DHCP pool. The V5812G supports multiple DHCP environments with this pool-based DHCP configuration.To open DHCP Pool Configuration mode, enter the ip dhcp pool command, then thesystem prompt will be changed from SWITCH(config)# to SWITCH(config-dhcp[POOL])#.Command Mode Descriptionip dhcp pool POOL Global Opens DHCP Pool Configuration mode to configureDHCP.To open DHCP Pool Configuration mode, use the service dhcp command in the GlobalConfiguration mode first!Tab. 3.5 shows main commands of DHCP Pool Configuration mode.Command Descriptiondefault-router Configures the default gateway of the pool.dns-server Configures a DNS server.range Configures the range of IP addresses.Tab. 3.5 Main Command of DHCP Pool Configuration Mode3.1.6 DHCP Option Configuration ModeIn DHCP Option Configuration mode, you can configure DHCP option. You can defineDHCP options that are carried in the DHCP communication between DHCP server andclient or relay agent. A specific DHCP option can be defined by its format type, length andvalue. To open DHCP Option Configuration mode, use the command. Then the systemprompt will be changed from SWITCH(config)# to SWITCH(dhcp-opt[NAME])#.Command Mode Descriptionip dhcp option format NAME Global Opens DHCP Option Configuration mode to configureDHCP options.!
