UMN:CLI User ManualV5812G474To display the status of ONU firmware, use the following command.Command Mode Descriptionshow onu firmware version OLT-ID [ONU-IDs]EnableGlobalGPONShows the status of ONU firmware.OLT-ID: GPON port numberONU-ID: ONU ID (1-64) or ONU serial numbershow onu firmware version[ONU-IDs] GPON-OLT Shows the status of ONU firmware.ONU-ID: ONU ID (1-64) or ONU serial number• Changing Active FirmwareIf an ONU supports the dual OS, you can change the active firmware using the followingcommand. To change the active firmware, use the following command.Command Mode Descriptiononu firmware active-changeONU-ID GPON-OLT Changes the active OS of ONU (with ONU reboot).ONU-ID: ONU ID (1 to 64) or ONU serial number11.2.10.2 Manual Upgrade (2)(1) Downloading Firmware to OLTTo download ONU (ONT) firmware in the system, use the following command.Command Mode Descriptioncopy {ftp | tftp} onu download Enable Downloads ONU firmware via FTP or TFTP.The following is an example of downloading ONU (ONT) firmware in the system.SWITCH# copy ftp onu downloadTo exit : press Ctrl+D--------------------------------------IP address or name of remote host (FTP): xxx.xxx.xxx.xxxDownload File Name : XXXXXX.xUser Name : userPassword:To remove the downloaded ONU (ONT) firmware in OLT, use the following command.Command Mode Descriptionremove onu firmware FILE-NAMEEnableGlobalGPONRemoves the downloaded ONU (ONT) firmware inOLT.To display the list of the downloaded ONU (ONT) firmware in OLT, use the followingcommand.
