User Manual UMN:CLIV5812G315The port that connects Master and Slave switch must belong to the same VLAN.8.8.2 Designating Master and Slave SwitchDesignate Master switch using the following command.Command Mode Descriptionstack master Global Sets the switch as a master switch.After designating Master switch, register Slave switch for Master switch. To register Slaveswitch or delete the registered Slave switch, use the following command.Command Mode Descriptionstack add MAC-ADDR[DESCRIPTION] GlobalRegisters slave switch.MAC-ADDR: MAC addressstack del MAC-ADDR Deletes slave switch.To make the cascading operate well, it is required to enable the interface of Slave switch.The switches in different VLANs cannot be added to the same switch group.You should designate Slave switch registered in Master Switch as Slave Switch. Todesignate Slave switch, use the following command.Command Mode Descriptionstack slave Global Sets the switch as a slave switch.8.8.3 Disabling CascadingTo disable the cascading, use the following command.Command Mode Descriptionno stack Global Disables the cascading.8.8.4 Displaying Cascading StatusTo display the cascading, use the following command.Command Mode Descriptionshow stackEnableGlobalBridgeShows a configuration of the cascading.ii
