User Manual UMN:CLIV5812G99When you use the write memory command, make sure there is no key input until [OK]message appears.6.2.3 Auto-SavingThe V5812G supports the auto-saving feature, allowing the system to save the systemconfiguration automatically. This feature prevents the loss of unsaved systemconfiguration by unexpected system failure.To allow the system to save the system configuration automatically, use the followingcommand.Command Mode Descriptionwrite interval <10-1440> GlobalEnables auto-saving with a given interval as a multipleof 10.10-1440: time interval (unit: minute)no write interval Disables auto-saving.6.2.4 System Configuration FileTo copy a system configuration file, use the following command.Command Mode Descriptioncopy running-config {FILENAME| startup-config}EnableCopies a running configuration file.FILENAME: configuration file namestartup-config: startup configuration filecopy startup-config FILENAME Copies a startup configuration file to a specified filename.copy FILENAME startup-config Copies a specified configuration file to the startupconfiguration file.copy FILENAME1 FILENAME2 Copies a specified configuration file to anotherconfiguration file.To back up a system configuration file using FTP or TFTP, use the following command.Command Mode Descriptioncopy {ftp | tftp} config upload{FILE-NAME | startup-config} EnableUploads a file to FTP or TFTP server with the nameconfigured by user.copy {ftp | tftp} config download{FILE-NAME | startup-config}Downloads a file from FTP or TFTP server with thename configured by user.To access FTP to back up the configuration or use the backup file, you should know FTPuser ID and the password. To back up the configuration or use the file through FTP, youcan recognize the file transmission because hash function is automatically turned on.!i
