User Manual UMN:CLIV5812G41Tab. 3.14 shows main commands of ONU Profile Configuration mode.Command Descriptionrate-limit Comfigures a rate-limit of a traffic flow between OLT and ONU(ONT).vlan-filter Configures an VLAN filtering.Tab. 3.14 Main Command of ONU Profile Configuration Mode3.2 Configuration Mode OverviewFig. 3.1 shows the overview of the configuration mode for the V5812G.Privileged EXEC ViewSWITCH>Privileged EXEC EnableSWITCH#Global Configuration modeSWITCH(config)#Bridge Configuration modeSWITCH(bridge)#Interface Configuration modeSWITCH(config-if)#RMON Configuration modeSWITCH(config-rmonalarm[N])#SWITCH(config-rmonevent[N])#SWITCH(config-rmonhistory[N])#DHCP Pool Configuration modeSWITCH(config-dhcp[POOL])#enableconfigure terminalbridgeinterface INTERFACEINTERFACE: interface nameip dhcp pool POOL(POOL: pool name)rmon-alarm <1-65535>rmon-event <1-65535>rmon-history <1-65535>exitBack to previous modeRoute-map Configuration modeSWITCH(config-route-map)#router {IP-PROTOCOL | vrrp}IP-PROTOCOL: protocol nameRouter Configuration modeSWITCH(config-dhcp[POOL])#route-map NAME{permit | deny} <1-65535>Option 82 Configuration modeSWITCH(config-opt82)#ip dhcp option82GPON Configuration modeSWITCH(gpon)#gponONU Profile Configuration modeSWITCH(config-onu-profile[NAME])#gpon-olt OLT-IDGPON-OLT Configuration modeSWITCH(config-gpon-olt[N/N])#onu-profile NAME createNAME: ONU profile nameRule Configuration modeSWITCH(config-flow[NAME])#SWITCH(config-policer[NAME])#SWITCH(config-policy[NAME])#flow [admin] NAME create (NAME: flow name)policer NAME create (NAME: policer name)policy [admin] NAME create (NAME: policy name)Fig. 3.1 Overview of Configuration Mode
