UMN:CLI User ManualV5812G604.2.3 Primary Authentication MethodYou can set the order of the authentication method by giving the priority to eachauthentication method.To set the primary authentication method, use the following commandCommand Mode Descriptionlogin {local | remote} {radius |tacacs | host} primary GlobalSets a system authentication method.local: console accessremote: telnet/SSH accessradius: RADIUS authenticationtacacs: TACACS+ authenticationhost: nominal system authentication (default)4.2.4 RADIUS Server4.2.4.1 RADIUS Server for System AuthenticationTo add/delete a RADIUS server for system authentication, use the following command.Command Mode Descriptionlogin radius server A.B.C.DKEY [auth_port PORT acct_portPORT] GlobalAdds a RADIUS server with its information.A.B.C.D: IP addressKEY: authentication key valueauth_port: authentication port (optional)acct_port: accounting port (optional)no login radius server [A.B.C.D] Deletes an added RADIUS server.You can add up to 5 RADIUS servers.4.2.4.2 RADIUS Server PriorityTo specify the priority of a registered RADIUS server, use the following command.Command Mode Descriptionlogin radius server moveA.B.C.D <1-5> GlobalSpecifies a priority of RADIUS server.A.B.C.D: IP address1-5: priority of RADIUS serveri
