Operation Manual – ACLH3C S3610&S5510 Series Ethernet Switches Chapter 4 Flow Template Configuration4-2To do… Use the command… RemarksEnter system view system-view ––Create abasic flowtemplateflow-template flow-template-namebasic { customer-cos |customer-vlan-id | dip | dipv6 | dmac |dport | dscp | ethernet-protocol |fragments | icmp-code | icmp-type |icmpv6-code | icmpv6-type |ip-precdence | ip-protocol | ipv6-dscp |ipv6-fragment | ipv6-protocol |service-cos | service-vlan-id | sip |sipv6 | smac | sport | tcp-flag | tos }*Create aflowtemplateCreate anextendedflowtemplateflow-template flow-template-nameextend { [ start ] offset-max-valuelength-max-value | ipv4 offset-max-valuelength-max-value | ipv6 offset-max-valuelength-max-value | l2 offset-max-valuelength-max-value | l4 offset-max-valuelength-max-value }*OptionalUse eithercommand.Enterinterfaceviewinterface interface-type interface-numberEnterinterfaceview orportgroupviewEnter portgroup viewport-group { aggregation agg-id |manual port-group-name }RequiredApply the flowtemplate to theinterface or port groupflow-template flow-template-nameOptionalThe defaultone applies bydefault.
