Operation Manual – QoSH3C S3610&S5510 Series Ethernet Switches Chapter 3 QoS Policy Configuration3-6To do… Use the command… RemarksConfigure accountingaction accountingConfigure TP actioncar { circommitted-information-rate [ cbscommitted-burst-size [ ebsexcess-burst-size ] ] [ pirpeak-information-rate ] [ red{ discard | pass } ] | nameglobal-car-name }Configure trafficfiltering behavior filter { deny | permit }Configure trafficmirroring actionmirror-to interface interface-typeinterface-numberConfigure nestedVLAN tag action nest top-most vlan-id vlan-idConfigure trafficredirect actionredirect { cpu | interfaceinterface-type interface-number |next-hop { ipv4-add [ ipv4-add ] |ipv6-add [ interface-typeinterface-number ] [ ipv6-add[ interface-typeinterface-number ] ] } }Remark DSCP valuefor packets remark dscp dscp-valueRemark 802.1p priorityfor packets remark dot1p 8021pRemark dropprecedence forpacketsremark drop-precedencedrop-precedence-valueRemark IP precedencefor packetsremark ip-precedenceip-precedence-valueRemark localprecedence forpacketsremark local-precedencelocal-precedenceRemark the serviceprovider networkVLAN ID for packetsremark service-vlan-idvlan-id-valueConfigure to get otherprecedence’s forpackets through thecorresponding prioritymapping tableprimap pre-defined { dscp-lp |dscp-dp | dscp-dot1p |dscp-dscp }RequiredYou can configurethe traffic behavioras required.
