Operation Manual – IPv4 RoutingH3C S3610&S5510 Series Ethernet Switches Chapter 3 OSPF Configuration3-31To do… Use the command… RemarksConfigure the maximumnumber of OSPF routesmaximum-routes { external |inter | intra } numberOptional15360 by default3.6.7 Configuring the Maximum Number of Load-balanced RoutesIf several routes with the same cost to the same destination are available, configuringthem as load-balanced routes can improve link utilization.Follow these steps to configure the maximum number of load-balanced routes:To do… Use the command… RemarksEnter system view system-view —Enter OSPF viewospf [ process-id |router-id router-id |vpn-instanceinstance-name ] *—Configure the maximumnumber of equivalentload-balanced routesmaximumload-balancingmaximumOptional4 by default3.6.8 Configuring a Priority for OSPFA router may run multiple routing protocols, and it sets a priority for each protocol.When a route found by several routing protocols, the route found by the protocol withthe highest priority will be selected.Follow these steps to configure a priority for OSPF:To do… Use the command… RemarksEnter system view system-view —Enter OSPF viewospf [ process-id |router-id router-id |vpn-instanceinstance-name ] *—Configure a priority forOSPFpreference [ ase ][ route-policyroute-policy-name ] valueOptionalThe priority of OSPFinternal routes defaults to10.The priority of OSPFexternal routes defaults to150.
