Operation Manual – IPv6 RoutingH3C S3610&S5510 Series Ethernet Switches Chapter 5 IPv6 BGP Configuration5-4To do... Use the command... RemarksSpecify an IPv6 peer andits AS numberpeer ipv6-addressas-number as-numberRequiredNot configured by default5.3.3 Advertising a Local IPv6 RouteFollow these steps to configure advertise a local route into the routing table:To do... Use the command... RemarksEnter system view system-view —Enter BGP view bgp as-number RequiredEnter IPv6 address familyview ipv6-family —Add a local route into IPv6BGP routing tablenetwork ipv6-addressprefix-length [ short-cut |route-policyroute-policy-name ]RequiredNot added by default5.3.4 Configuring a Preferred Value for Routes from a Peer/Peer GroupFollow these steps to configure a preferred value for routes received from a peer/peergroup:To do... Use the command... RemarksEnter system view system-view —Enter BGP view bgp as-number RequiredEnter IPv6 address familyview ipv6-family —Configure a preferredvalue for routes receivedfrom a peer/peer grouppeer { ipv6-group-name |ipv6-address }preferred-value valueOptionalBy default, the preferredvalue is 0.
