Operation Manual – AAA-RADIUS-HWTACACSH3C S3610&S5510 Series Ethernet SwitchesChapter 1 AAA/RADIUS/HWTACACSConfiguration1-33Caution:z If the RADIUS server and the security policy server reside on the same physicaldevice, you do not need to configure the IP address of the security policy server.z The specified security policy server must be a security policy server or RADIUSserver that is correctly configured and working normally. Otherwise, the device willregard it as an illegal server.1.4.12 Enabling the Listening Port of the RADIUS ClientFollow these steps to enable the listening port of the RADIUS client:To do… Use the command… RemarksEnter system view system-view —Enable the listening portof the RADIUS client radius client enable OptionalEnabled by default1.5 Configuring HWTACACS1.5.1 Creating a HWTACACS schemeThe HWTACACS protocol is configured on a per scheme basis. Before performingother HWTACACS configurations, follow these steps to create a HWTACACS schemeand enter HWTACACS scheme view:To do… Use the command… RemarksEnter system view system-view —Create a HWTACACSscheme and enterHWTACACS schemeviewhwtacacs schemehwtacacs-scheme-nameRequiredNot defined by defaultNote:z Up to 16 HWTACACS schemes can be configured.z A scheme can be deleted only when it is not referenced.
