Operation Manual – Information CenterH3C S3610&S5510 Series Ethernet Switches Chapter 1 Information Center Configuration1-20Caution:z As the default system configurations for different channels vary, ensure that theoutput of log, trap, and debug information for the specified channel (console in thisexample) of all modules is disabled before the system information can be output tomeet the current network requirements.z Use the display channel command to display the state of a channel.# Enable system information output for the ARP and IP modules, with informationseverity ranging from emergencies to informational.[Sysname] info-center source arp channel console log level informational[Sysname] info-center source ip channel console log level informational[Sysname] quit# Enable the display of log information on a monitor terminal. terminal monitor% Current terminal monitor is on terminal logging% Current terminal logging is onAfter the above configuration takes effect, if the specified module generates loginformation, the information center automatically sends the log information to theConsole and displays it on the console.
