Operation Manual – IPv6 RoutingH3C S3610&S5510 Series Ethernet Switches Chapter 5 IPv6 BGP Configuration5-9Note:If the default-route imported command is not configured, using the import-routecommand cannot redistribute any IGP default route.5.4.3 Advertising a Default Route to a Peer/Peer GroupFollow these steps to configure to advertise default route to a peer/peer group:To do... Use the command... RemarksEnter system view system-view —Enter BGP view bgp as-number RequiredEnter IPv6 address familyview ipv6-family —Advertise a default routeto a peer/peer grouppeer { ipv6-group-name |ipv6-address }default-route-advertise[ route-policy route-policy-name ]RequiredNot advertised bydefaultNote:With the peer default-route-advertise command used, the local router advertises adefault route with itself as the next hop to the specified peer/peer group, regardless ofwhether the default route is available in the routing table.5.4.4 Configuring Route Distribution PolicyFollow these steps to configure policies for route distribution:To do... Use the command... RemarksEnter system view system-view —Enter BGP view bgp as-number RequiredEnter IPv6 address familyview ipv6-family —Configure outbound routefilteringfilter-policy{ acl6-number |ipv6-prefixipv6-prefix-name } export[ protocol process-id ]RequiredNot configured by default
