Operation Manual – IPv6 RoutingH3C S3610&S5510 Series Ethernet Switches Chapter 5 IPv6 BGP Configuration5-27III. Configuration procedure1) Configure IPv6 addresses for VLAN interfaces (omitted)2) Configure IPv6 BGP basic functions# Configure Switch A. system-view[SwitchA] ipv6[SwitchA] bgp 100[SwitchA-bgp] router-id 1.1.1.1[SwitchA-bgp] ipv6-family[SwitchA-bgp-af-ipv6] peer 100::2 as-number 200[SwitchA-bgp-af-ipv6] network 1:: 64#Configure Switch B. system-view[SwitchB] ipv6[SwitchB] bgp 200[SwitchB-bgp] router-id 2.2.2.2[SwitchB-bgp] ipv6-family[SwitchB-bgp-af-ipv6] peer 100::1 as-number 100[SwitchB-bgp-af-ipv6] peer 101::1 as-number 200[SwitchB-bgp-af-ipv6] peer 101::1 next-hop-local# Configure Switch C. system-view[SwitchC] ipv6[SwitchC] bgp 200[SwitchC-bgp] router-id 3.3.3.3[SwitchC-bgp] ipv6-family[SwitchC-bgp-af-ipv6] peer 101::2 as-number 200[SwitchC-bgp-af-ipv6] peer 102::2 as-number 200# Configure Switch D. system-view[SwitchD] ipv6[SwitchD] bgp 200[SwitchD-bgp] router-id 4.4.4.4[SwitchD-bgp] ipv6-family[SwitchD-bgp-af-ipv6] peer 102::1 as-number 2003) Configure route reflector# Configure Switch C as a route reflector, Switch B and Switch D as its clients.[SwitchC-bgp-af-ipv6] peer 101::2 reflect-client[SwitchC-bgp-af-ipv6] peer 102::2 reflect-client
