Operation Manual – Multicast ProtocolH3C S3610&S5510 Series Ethernet Switches Chapter 6 PIM Configuration6-48Protocol: pim-sm, Flag: SPT LOCUpTime: 00:00:42Upstream interface: Vlan-interface300Upstream neighbor: NULLRPF prime neighbor: NULLDownstream interface(s) information:Total number of downstreams: 11: Vlan-interface105Protocol: pim-sm, UpTime: 00:00:42, Expires:-# View the PIM routing table information on Switch E.[SwitchE] display pim routing-tableTotal 1 (*, G) entry; 0 (S, G) entry(*, 225.1.1.1)RP: 192.168.9.2 (local)Protocol: pim-sm, Flag: WCUpTime: 00:13:16Upstream interface: RegisterUpstream neighbor: 192.168.4.2RPF prime neighbor: 192.168.4.2Downstream interface(s) information:Total number of downstreams: 11: Vlan-interface102Protocol: pim-sm, UpTime: 00:13:16, Expires: 00:03:226.7.3 PIM-SSM Configuration ExampleI. Network requirementsz Receivers receive VOD information through multicast. The receiver groups ofdifferent organizations form stub networks, and one or more receiver hosts exist ineach stub network. The entire PIM domain operates in the SSM mode.z Host A and Host C are multicast receivers in two stub networks.z Switch D connects to the network that comprises the multicast source (Source)through VLAN-interface 300.z Switch A connects to stub network N1 through VLAN-interface 100, and to SwitchD and Switch E through VLAN-interface 101 and VLAN-interface 102 respectively.z Switch B and Switch C connect to stub network N2 through their respectiveVLAN-interface 200, and to Switch E through VLAN-interface 103 andVLAN-interface 104 respectively.z Switch E connects to Switch A, Switch B, Switch C and Switch D.z The SSM group range is 232.1.1.0/24.
