Operation Manual – Multicast ProtocolH3C S3610&S5510 Series Ethernet Switches Chapter 5 IGMP Configuration5-85.3.3 Configuring IGMP VersionsBecause messages vary with different IGMP versions, the same IGMP version shouldbe configured for all routers on the same subnet before IGMP can work properly.I. Configuring an IGMP version globallyFollow these steps to configure an IGMP version globally:To do... Use the command... DescriptionEnter system view system-view —Enter IGMP view igmp —Configure an IGMPversion globally version version-number OptionalIGMPv2 by defaultII. Configuring an IGMP version on an interfaceFollow these steps to configure an IGMP version on an interface:To do... Use the command... DescriptionEnter system view system-view —Enter Ethernet port view interface interface-typeinterface-number —Configure an IGMPversion on the interfaceigmp versionversion-numberOptionalIGMPv2 by default5.3.4 Configuring a Static Member of a Multicast GroupAfter an interface is configured as a static member of a multicast group, it will act as avirtual member of the multicast group to receive multicast data addressed to thatmulticast group for the purpose of testing multicast data forwarding.Follow these steps to configure an interface as a statically connected member of amulticast group:To do... Use the command... DescriptionEnter system view system-view —Enter Ethernet port view interface interface-typeinterface-number —
