Electra Elite IPK Document Revision 4Programming Manual 2 - 43______________________________________________________________________________________________________________________________________________________________________1-1-32 Automatic Day/Night Mode by Day ofWeek SelectionGeneral DescriptionUse this Memory Block to select either Pattern 1 or Pattern 2 Day/Night Mode starttime for each day of the week. Memory Block 1-1-27 (Automatic Day/Night ModeSwitching Time Assignment) sets Day/Night Mode start time for Pattern 1 and Pattern2 to switch the system between Day Mode and Night Mode.DisplaySettingsLK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8 Default notassigned.Sun Mon Tue Wed Thu Fri SatProgramming Procedures1 Go off-line.2 Press LK1 + LK1 + CB to access the Memory Block.3 Press the corresponding CO/PBX line key to change the data option.Each time a CO/PBX line is pressed, the LED indication changes from Pattern 1 toPattern 2.Default ValuesSunday ~ Saturday = Pattern 14 Press G to write the data and display the next Memory Block.5 Program the next Memory Block or press E to go back on-line.System Mode1Submode1Data No.32PC Programming¦+BM3 2 : D / N B Y D A YT I M E D I S P L A YTitleDataNo.CO/PBXLine LED Off OnDataDay/NightAutomaticSwitchingPattern 1Day/NightAutomaticSwitchingPattern 2The shaded area indicatesthe default setting.
