2 - 482 Memory Blocks___________________________________________________________________________________Document Revision 4 Electra Elite IPK___________________________________________________________________________________3-61 DIT/ANA Delay Answer TimeSelectionGeneral DescriptionUse this Memory Block to specify the time an incoming call rings before beingchanged to a DIT/ANA call.This Memory Block can be adjusted in 1-second intervals (R3000 or higher).Display (2500 or lower)SettingsRelated ProgrammingRefer to next page for R3000 or higher Programming Procedures.LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8 The shadedselection is thedefault.0s 5s 10s 20s 30s 40s 50s 60sProgramming Procedures1 Go off-line.2 Press LK3 + G + FA to access the Memory Block.3 Press the applicable line key to change the time an incoming call rings before it is changed to a DIT/ANA call on CO/PBX NO. Use the following to enter data:Jto move the cursor leftLto move the cursor rightK~Ito enter numeric data or CO/PBX No.– OR –D to go to the next assigned CO/PBX No.4 Press G to write the selected data and display the next Memory Block.5 Program the next Memory Block or press E to go back on-line.CO/PBX Line Mode3Submode—Data No.61PC Programming¦+BCT0 1 / 6 1 : D L Y A N S 0 sT I M E D I S P L A YCO/PBXNo.(01~64)DataNo.SettingDataTitle
