2 - 418 Memory Blocks___________________________________________________________________________________Document Revision 4 Electra Elite IPK___________________________________________________________________________________2-06 Line Key Selection for Tenant ModeGeneral DescriptionUse this Memory Block to assign functions to each CO/PBX line key on eachtelephone in a tenant specified as Tenant Mode in Memory Block 2-05 (Line KeySelection).DisplaySettingsPage 1LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8The shadedselection is thedefault.NON CO(CO/PBX) FW BNA FW ALLCallAppearanceKeyFeatureAccess Key TKGP RouteAdvancePage 2LK 9 LK102 LK 11 LK 12 LK 13 LK 14 LK 15 LK 16SIE Microphone H SETSCROLL(ANI/CallerID)DND(On/Off)LOG(On/Off)BGM(On/Off) ICMProgramming Procedures1 Go off-line.2 Press LK2 + KF to access the Memory Block. Verify that Memory Block 2-05 is set to TNAT.3 Press the corresponding CO/PBX line key to select the function for Line Key No. 01. When indicated, add Setting Data 2 usingdial keys.4 Press G to write data and display Line Key No. 2.5 Repeat Steps 3 and 4 for each Line Key assignment. After Line Key No. 24 is programmed, the next Memory Block is displayed.6 Program the next Memory Block or press E to go back on-line.Tenant Mode2Submode—Data No.06PC Programming¦+BN0 0 / 0 6 : L 0 1 = C O 0 1T I M E D I S P L A YDataNo.SettingData1TenantNo.(00~47)LineKey(01~24)SettingData2Page
