Electra Elite IPK Document Revision 4Programming Manual 2 - 307______________________________________________________________________________________________________________________________________________________________________1-13-00 PRT Channel AssignmentGeneral DescriptionUse this Memory Block to assign the available B channels used for PRI.DisplaySettingsPage 1LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8Channel 1 Channel 2 Channel 3 Channel 4 Channel 5 Channel 6 Channel 7 Channel 8Page 2LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8Channel 9 Channel 10 Channel 11 Channel 12 Channel 13 Channel 14 Channel 15 Channel 16Page 3LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8Channel 17 Channel 18 Channel 19 Channel 20 Channel 21 Channel 22 Channel 23 Channel 24CO/PBXLine LED Off On The shaded selection isthe default.Data No (NotAssigned)Yes(Assigned)Programming Procedures1 Go off-line.2 Press LK1 + LK13 to access the Memory Block.3 Press the corresponding CO/PBX line key to change the Setting Data option.4 Press G to write the data. The next Memory Block is displayed.5 Program the next Memory Block or press E to go back on-line.System Mode1Submode13Data No.00PC Programming¦+AN0 1 / 0 0 : C H A N N E L | 0 1T I M E D I S P L A YDataNo.SettingDataPRT1~8 Title
