Electra Elite IPK Document Revision 4Programming Manual 2 - 407______________________________________________________________________________________________________________________________________________________________________1-16-14 Port VLAN Group MembershipGeneral DescriptionUse this Memory Block to create a list of accepted VLANs for each port. WhenMemory Block 1-16-04 (VLAN Mode Selection) is set to YS, each port acceptsframes tagged with VLAN IDs only when the port is programmed as a member of thatVLAN Group. Frames without VLAN tags are also permitted. When Port Mirroring isused, the source and target ports must be members of the same VLAN(s).R1500 or higher is required.DisplaySettingsLK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8 The shadedselection is thedefault.NO YSProgramming Procedures1 Go off-line.2 Press LK1 + LK16 + JJAD to access the Memory Block.3 Press the corresponding CO/PBX line key to change the option.4 Press G to write the data.5 Repeat steps 3 and 4 for each HUB(8)-U( ) ETU and VLAN Group.6 Press E to go back on-line.System Mode1Submode16Data No.14PC Programming¦+AB1 4 : 1 P O R T 0 1 = 1 N OT I M E D I S P L A YDataNo.SettingDataTitleVLAN Gp01~16HUB1~3Port1~8
