2 - 528 Memory Blocks___________________________________________________________________________________Document Revision 4 Electra Elite IPK___________________________________________________________________________________4-18 Station Name AssignmentGeneral DescriptionUse this Memory Block to assign names for telephone stations.R4000 or higher is required to support 16 characters for the Station Name.Display (R3500 or lower)Display (R4000 or higher)Programming Procedures1 Go off-line.2 Press LK4 + AH to access the Memory Block.3 Use the dial pad to enter data. Use the following to enter data:Jto move the cursor leftLto move the cursor rightK~Ito enter numeric data or Tel Port No.– OR –D to go to next assigned Tel Port No.H to clear data when cursor is at setting dataB + Ato enter A for Port Numbers 100~109B + Bto enter B for Port Numbers 110~119B + Cto enter C for Port Number 120Default ValuesNot Specified4 Press G to write the data and display the next Memory Block.5 Program the next Memory Block or press E to go back on-line.Telephone Mode4Submode—Data No.18PC Programming¦+BTTDataNo.0 1 / 1 8 : < >T I M E D I S P L A YTelPortNo.(01~C0)SettingDataDataNo.0 1 / 1 8 : S T A N A M ETelPortNo.(01~C0)SettingDataSetting Data
