NEC Electra Elite IPK Programming Manual

Also see for ElectraElite IPK: User manual User guide User guide User guide Attendant user guide

Contents

NEC Electra Elite IPK Programming Manual Manual pdf 466 page image

Electra Elite IPK Document Revision 4Programming Manual 2 - 389______________________________________________________________________________________________________________________________________________________________________1-16-05 Default VLAN ID Tag InsertionAssignmentGeneral DescriptionUse this Memory Block to insert VLAN ID tagging to data frames from network devicesthat cannot insert VLAN tags. When data without a VLAN tag is transmitted by thedevice on the port, a tag is inserted with the VLAN ID assigned by this Memory Block.R1500 or higher is required.DisplayProgramming Procedures1 Go off-line.2 Press LK1 + LK16 + JJKE to access the Memory Block.3 Use dial pad keys to enter Setting data. Use the following to enter data:Use Jto move cursor leftUse Lto move cursor rightUse K~ Ito enter numeric data VLAN ID range is 0001~4095 (0x001~ 0xfff Hex).Default Values :All ports = 00014 Press G to write the data.5 Repeat steps 3 and 4 for each port.6 Press E to go back on-line.System Mode1Submode16Data No.05PC Programming¦+AB0 5 : 1 - 1 I D = 0 0 0 1T I M E D I S P L A YDataNo.SettingDataTitlePORT1~8HUB1~3