3 - 40 Advanced Applications______________________________________________________________________________________________________________________________________________________________________Document Revision 4 Electra Elite IPK3.4 Call by Call (CBC) Programming (LCR PC Software V2.0 or Higher)3.4.1 The International/Operator TableThis table has a page for each LCR Class (1~4) that contains fixeddialing patterns that can be assigned to that Class. Two routes can be assigned and arranged in priority. PRTshould have higher priority. Trunk Group or Route Advance Blocks are specified inTG/RAB. Delete digits specifies the number of digits to delete from thefirst dial when using PRT. PreDigits controls whether digits that are specified in pre-digittables are dialed before the International or Operator code. When TG/RAB is not assigned, outgoing calls cannot be made.3.4.2 The OCC TableThis Table has 16 pages (called Table 1~Table 16) that are requiredfor each of the LCR Classes for a total of 64 tables with fixed dialingpatterns. Dial means following the OCC dial. Two routes can be assigned and arranged in priority. PRTshould have higher priority.International or Operator Table ExampleLCR Class1~4 Dial Priority TG/RAB DeleteDigitsPreDigitsAdd/Not AddClass10- 1 RAB 09 1 Not Add2 None None Not Add00 1 RAB 10 2 Not Add2 None None Not Add010 1 RAB 11 3 Not Add2 None None Not Add011 1 RAB 12 3 Not Add2 None None Not Add01N 1 RAB 13 2 Not Add2 None None Not AddON 1 RAB 14 1 Not Add(N = 2~9) 2 None None Not Add
