2 - 294 Memory Blocks______________________________________________________________________________________________________________________________________________________________________Document Revision 4 Electra Elite IPK1-11-05 T1 Channel SelectionGeneral DescriptionUse this Memory Block to specify the digital trunk interface (DTI) channel numbers tobe used.DisplayProgramming Procedures1 Go off-line.2 Press LK1 + LK11 + KE to access the Memory Block.3 Press the corresponding CO/PBX line key to select DTI channel number. Use to following to enter data:C to go to the next pageDefault ValuesDTI No. 1 Channels 01~24 = OffDTI No. 2 Channels 01~24 = OffDTI No. 3 Channels 01~24 = OffDTI No. 4 Channels 01~24 = OffDTI No. 5 Channels 01~24 = OffDTI No. 6 Channels 01~24 = OffDTI No. 7 Channels 01~24 = OffDTI No. 8 Channels 01~24 = Off4 Press G to write the data. The next Memory Block is displayed.5 Program the next Memory Block or press E to go back on-line.System Mode1Submode11Data No.05PC Programming¦+AD0 1 / 0 5 : C H A N E L | 0 1T I M E D I S P L A YDataNo.ChannelNo.DTI No.(01~08) TitleChannel Numbers (01~24) correspond to CO/PBX line key.CO/PBXLineKeyChannel No.PageDTI No.1DTI No.2DTI No.3~801~08 01~08 01~08 01~08 109~16 09~16 09~16 09~16 217~24 17~24 17~24 17~24 3CO/PBXLine LED Off OnData No(Not Assigned)Yes(Assigned)The shadedselection is thedefault.
