Electra Elite IPK Document Revision 4Programming Manual 2 - 313______________________________________________________________________________________________________________________________________________________________________1-13-04 PRT B Channel Outgoing PrioritySelectionGeneral DescriptionUse this Memory Block to assign the Outgoing Priority for the B-channels when callsare originated on a PRT(1)-U( ) ETU.This assignment is allowed by handset programming and SAT.DisplaySettings Notes LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8 The shadedselection is thedefault.H → LHigh to LowL → HLow to HighProgramming Procedures1 Go off-line.2 Press LK1 + LK13 + KD to access the Memory Block.3 Press the corresponding CO/PBX line key to change the data option.4 Press G to write the data. The next Memory Block is displayed.5 Program the next Memory Block or press E to go back on-line.Related ProgrammingM.B. Number Memory Block Name7-1 Card Interface Slot Assignment1-13-00 PRT Channel Assignment1-13-01 PRT Signal Format Selection1-13-03 Call by Call Service Selection1-13-05 PRT B Channel-to-Trunk Group Assignment5-06 Trunk Group Outgoing Priority SelectionThis Memory Block applies to all firmware versions of the PRT(1)-U( ) ETU.System Mode1Submode13Data No.04PC Programming¦+AN0 1 / 0 4 : C H S L C = H > LT I M E D I S P L A YDataNo.SettingDataPRT1~8 Title
