Electra Elite IPK Document Revision 4Programming Manual 1 - 13______________________________________________________________________________________________________________________________________________________________________SECTION 3 SYSTEM D ATA L ISTThe System Data List is a complete list of Memory Blocks that are available in theElectra Elite IPK system. The information is organized by mode, submode, and thennumerically by Memory Block number. The Memory Block number and name, thedefault values, and programming values are provided for each Memory Block.LK 1 System ModeLK 1 CO LineDataNo. Memory Block Name Default Value Programming Values00 Pause Time Selection 3.0s 1.0s, 3.0s01 DP Interdigit Time Selection B Pattern A or B02 Hookflash Time Selection 600ms 20ms, 40ms, 60ms, 80ms, 100ms,140ms,160ms, 200ms, 400ms, 600ms,800ms,1.0s, 1.5s, 2.0s, 3.0s, 5.0s03 Hold Recall Time Selection(Non-Exclusive Hold)25s (R2500 or lower)60s (R3000 orhigher)25s, 45s, 60s, 90s, 120s, 180s, 240s,∞ (No Limit)(R2500 or lower)000s (No Limit), 001s~255s (R3000 orhigher)04 Automatic Redial Time Selection Table 1: 030Table 2: 060Table 3: 002Table 1: 001 ~ 050 sec.Table 2: 001 ~ 100 sec.Table 3: 001 ~ 015 times05 Start Time Selection 10s (R2500 or lower)02s (R3000 orhigher)2s, 10s, 20s, 30s, 40s, 50s, 60s, 70s(R2500 or lower)00s (No Limit), 01s~99s (R3000 orhigher)06 CO/PBX Incoming Ringing AlarmTime Selection∞ (No Limit) (R2500or lower)000s (R3000 orhigher)10s, 20s, 30s, ∞ (R2500 or lower)000s (No Limit), 001s~255s (R3000 orhigher)07 Tie Line Delay Ringing TimeSelection∞ (No Limit) (R2500or lower)000s (R3000 orhigher)10s, 20s, 30s, ∞ (R2500 or lower)000s (No Limit), 001s~255s (R3000 orhigher)09 Manual Pause Selection NO NO, YS11 System Transfer/Camp-OnSelectionYS NO, YS
