2 - 80 Memory Blocks______________________________________________________________________________________________________________________________________________________________________Document Revision 4 Electra Elite IPK1-1-61 8-Digit Matching Table to ClassAssignmentGeneral DescriptionUse this Memory Block to program each 8-digit Matching Table to allow or denyassignment per class. Classes 00 and 15 are fixed. Only classes 01 ~14 can beprogrammed.DisplaySettingsRelated Programming.Refer to Chapter 3 Advanced Applications, Section 1 Code Restriction on page 3-1.LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8 The shadedselection is thedefault.NON YS(Allow)NO(Deny)Programming Procedures1 Go off-line.2 Press LK1 + LK1 + FA to access the Memory Block.3 Press the corresponding CO/PBX line key to change the data option for Class 01 Table 00. Classes:Class 00 and 15 cannot be programmedClass 00 has no restrictions (Allow)Class 15 has restricted outgoing (Deny)Refer to the table on the next page.4 Press G to write the data and advance to the next Table and then to the next Class. Repeat Steps 3 and 4 for each Classand Table.5 After data for the last Table for the last Class is entered, the next Memory Block is displayed.6 Program the next Memory Block or press E to go back on-line.System Mode1Submode1Data No.61PC Programming¦+ACDataNo6 1 : C L S 0 1 ( 0 0 ) = Y ST I M E D I S P L A YClassNo.01~14Table00~15Title SettingData
