7-217 In-Tank Setup Line Manifolded Tank StatusLine Manifolded Tank StatusIf necessary, press STEP until you see the message:This entry tells the system which tanks are line manifolded together (see Figure 7-3), allowing the system toprovide cumulative volume information on product stored in a line manifolded tank set. You only need to enter thisinformation for one of the tanks in the line manifolded set. The system automatically enters the information for theother tank (s) in the set. For example, if you are entering setup information for Tank #3 as shown in the figure, andit is line manifolded with Tank #1 (itself in a siphon manifolded set), you would press CHANGE until 01 appears(you would press the Right-Arrow key to move to the next field if another tank were in the line manifolded set, thenpress CHANGE until that tank’s number appeared). Press ENTER when you are done making these changes.Figure 7-3. Line Manifolding A Siphon Manifolded Set To A Single TankLeak Minimum PeriodicIf necessary, press STEP until you see the message:This value tells the system the minimum tank volume required to record a passed periodic test. The value reflectsfederal, state, and local requirements.Legend for numbered boxes:1. To dispenser 4. T22. T1 5. T33. PumpsT3: LINE MANIFOLDEDT#: 00,00,00,00,00,00,00consoles\l&s.eps132 4 5T1: (Product Label)LEAK MIN PERIODIC: 000%
