14 Line Leak Test Lockout Individual Schedules14-2Press CHANGE and enter the daily lockout start time. Press the Right Arrow key to select AM or PM. PressENTER. The system confirms your entry with the message:Press STEP to display the message:Press CHANGE and enter the daily lockout stop time. Press the Right Arrow key to select AM or PM. PressENTER. The system confirms your entry with the message:Press FUNCTION to exit or press STEP to return to the LOCKOUT SCHEDULE message.Individual SchedulesOnce you have selected the Line Leak Test Lockout Setup function, press STEP to display the message:Press CHANGE and press ENTER. The system confirms your choice with the message:Press STEP to display the message:If you want to change the lockout schedule number (you can have up to seven individual lockout schedules), pressTANK/SENSOR .NOTE: Do not press ENTER after changing the lockout schedule number. You must enter the Start Day(described below) before pressing ENTER.To set the start day for the lockout schedule number displayed, press CHANGE until the day that you wantappears. Press ENTER. The system confirms your choice with the message:Press STEP to display the message:TIME: XX:XX XMPRESS TO CONTINUEDAILY LOCKOUTSTOP TIME: DISABLEDTIME: XX:XX XMPRESS TO CONTINUELOCKOUT SCHEDULEDAILYINDIVIDUALPRESS TO CONTINUELOCKOUT #: 1START DAY: MONSTART DAY: (Day)PRESS TO CONTINUELOCKOUT #1: (Day) (START)TIME: DISABLED
