7 In-Tank Setup Product Labels7-2Press STEP. If more than one module is installed, the system automatically advances to the TANK CONFIGmessage for the next module. Up to 2 modules may be installed. Repeat the steps described above for eachmodule until you have entered the configuration information (probe positions) for all modules and the systemdisplays the ENTER PRODUCT LABEL message.Product LabelsIf necessary, press STEP until you see the message:Enter the type of fuel (e.g., Diesel, Unleaded, etc.) in the selected tank, identified in the second line of themessage. In international installations, the first two characters of the product label will be sent to third partyequipment as a GRADE label, i.e., UL UNLEADED will send “UL.”To enter the type of fuel in the tank, press CHANGE. Enter an alphanumeric label for any system-compatible fluidfuel. Press ENTER to confirm your entry. The system displays:Press STEP to continue.Product CodeIf necessary, press STEP until you see the message:Enter the alphanumeric code used by a point-of-sale terminal or other external device to identify product forinventory control purposes.NOTE: Many point of sale and pump control devices within the United Kingdom use 4* to indicate “Four Star”premium grade petrol. The asterisk * is entered by pressing the zero key 5 times.To enter the product code for the selected tank, press CHANGE. Enter the alphanumeric code. Press ENTER toconfirm your entry. The system displays:Press STEP to continue.ENTER PRODUCT LABELT1:T1: (Product Label)PRESS TO CONTINUET1: (Product Label)PRODUCT CODE: 1PRODUCT CODE: XPRESS TO CONTINUE
