6-36 Communications Setup Port SettingsThe choices are 7 or 8. To accept 7, press STEP. To choose 8, press CHANGE and press ENTER. The systemconfirms your choice with the message:Press STEP to continue.DIAL TYPEChoose the Dial Type (Tone or Pulse) that matches the receiving device.NOTE: The above message appears only for systems equipped with a modem module.To accept Tone, press STEP. To choose Pulse, press CHANGE and press ENTER. The system displays themessage:Press STEP to continue.ANSWER ONUse this display to set the number of rings on which the system answers an incoming communication. You mayenter 0 through 9 rings.NOTE: The above message appears only for systems equipped with a modem module.To accept the system default of 1 ring, press STEP. To choose another value you can toggle the CHANGE key (for2 through 8 rings) or enter the desired value using the numeric keys. Press ENTER to confirm your entry. Thesystem displays:Press STEP to continue.SECURITY CODEIf desired, you can enter a 6-digit security code for this board. To accept no code press STEP to continue. To entera code press CHANGE.Enter the 6-digit code (e.g., 000016) and press ENTER. The system confirms your choice with the message:DATA LENGTH: X DATAPRESS TO CONTINUECOMM BOARD: 1 (Type)DIAL TYPE: TONEDIAL TYPE: PULSEPRESS TO CONTINUECOMM BOARD: 1 (Type)ANSWER ON: 1ANSWER ON: (Number)PRESS TO CONTINUECOMM BOARD: 1 (Type)CODE: DISABLEDCOMM BOARD: 1 (Type)CODE: 000016
