5-55 System Setup Shift BIR PrintoutsTo leave a shift start time disabled, press STEP. (The system displays the SHIFT START TIME message for thenext shift.)To set a start time for shift 1, press CHANGE, and enter the shift 1 start time. Press the Left or Right Arrow toselect AM or PM. Then press ENTER. The system confirms your entry with the message:Press STEP. The system displays the SHIFT START TIME message for the next shift:Repeat the above procedures to enter or disable start times for shifts 2, 3, and 4.Shift BIR PrintoutsIf necessary, press STEP until you see the message:Shift BIR Printouts enabled causes a BIR report to print at the end of every shift. If you want a BIR printout at theconclusion of each shift, press STEP to continue. To disable Shift BIR Printouts, press CHANGE, ENTER, thenSTEP.Daily BIR PrintoutsIf necessary, press STEP until you see the message:Daily BIR Printouts enabled causes a BIR report to print at the end of the day’s last shift. If you want a BIRprintout at the conclusion of the last shift, press STEP to continue. To disable Daily BIR Printouts, pressCHANGE, ENTER, then STEP.Ticketed DeliveryIf necessary, press STEP until you see the message:When you enable ticketed delivery, you can manually enter ticketed volumes using the receipts from tank deliverytrucks. To enter this data, use the Delivery Maintenance function in the Operating Mode. This feature generatesreports showing delivery variances between ticketed volume and gauged volume, book variance, and varianceanalysis. To enable Ticketed Delivery, press CHANGE, ENTER, then STEP.TIME: XX:XX:XMPRESS TO CONTINUESHIFT #2 START TIMETIME: DISABLEDSHIFT BIR PRINTOUTSENABLEDDAILY BIR PRINTOUTSENABLEDTICKETED DELIVERYDISABLED
