PRINTING WITH THE 4213Printing the LJ2D font status sheetMake sure the display reads EMULATION/LJ2D*, then use thedisplay to select your desired language translation table. Pressthe Online button to put the printer online (so your table choicewill take effect), then press the button again to take the 4213 offline. Next press the Test/[Down Arrow] button to access theTest Menu. Press the Last Page/[Right Arrow] button to displayTEST MENU/FONT STATUS. Now press the Select/[*] button toprint the font status sheet. After the pages are printed, press theOnline button to put the printer online again.Reading the LJ2D font status sheetThe LJ2D Font Status Sheet (refer to figure 4-4) lists all the fontsthat are currently loaded and available for use with the emulation:• The font number is assigned by the printer to each font set.A font is selected through the menu by its unique fontnumber.• Fonts are grouped on the status sheet according to their fontsource. Fonts are listed in the following order:—Permanent soft fonts, if present—Left or Right Cartridge fonts, if present—Internal fonts.Note: You will not erase permanent soft fonts from memory byconfiguring LJ2D settings. Generally, permanent soft fontsremain in the memory until the printer is turned off.The status sheet reports the following information for each fontlisted:• The font number: Assigned by the printer to each font set.A font is selected through the menu by its unique fontnumber.• The symbol set: Table 4-2 lists the possible symbol sets.• Pitch: Denotes the number of characters per inch. Fixedspacing is designated by F. Proportional spacing isdesignated by P.XEROX 4213 LASER PRINTER USER GUIDE 4-11
