SIMM KIT INSTALLATION AND REMOVAL INSTRUCTIONS6. Press out on the locking tabs to release the SIMM board.7. Allow the board to rotate backward to a 30° angle, andremove it from the slot (refer to figure A5-11).Figure A5-11. Rotating SIMM board to a 30° angle forremovalSIMM board in J11 rotated to 30° angle8. To remove the remaining SIMM boards, repeat steps 2 to 4.Note: Remove only the SIMM boards that are obstructingthe replacement of the faulty SIMM board.9. Once all the obstructing SIMM boards are removed, replacethe faulty board(s) with the new board(s).Note: Refer to the installation procedures for instructions oninstalling SIMM boards.4213 LASER PRINTER USER GUIDE A5-11
