XEROX COAX/TWINAX OPTIONIBM error codesThis section describes the error codes which will be reported bythe 4213 laser printer to the error logging system.Table A3-3. IBM Error CodesNumber Message Meaning/action1410 IBM Type 1 error A condition has occurred that may cause loss of textinformation.1411 IBM Type 2 error A condition has occurred that may cause a change in theintended appearance or presented information but does notaffect the interpretation of text or cause presentation spaceoverruns.1412 IBM Type 3 error A data stream command has been received with anunsupported control class or type code. This may result inloss of text or change in appearance of presentedinformation.1413 IBM Type 4 error An out of range control code parameter has been detected.This may result in loss of text and or change in appearanceof presented information.1414 IBM graphic character error An unsupported graphic character code has been detected.This may result in a change in appearance of presentedinformation.1415 IBM Invalid SCS parameter error An out of range control code parameter has been detectedin SCS mode. This may result in loss of text and/or changein appearance of presented information.1416 IBM invalid SCS command error A data stream command has been received in SCS modewith an unsupported control class or type code. This mayresult in loss of text and/or change in appearance ofpresented information.1417 IBM invalid character set IDerrorAn invalid character set has been requested.1418 IBM function not supported. An IBM command has been received which is not supportedby the selected printer type.A3-82 XEROX 4213 LASER PRINTER USER GUIDE
